Ramset Anchor Design is provided to assist in the choice of a suitable fastener which meets a specific set of design inputs. It is the designers' responsibility to confirm that the suggested anchor meets the actual design requirements. The software is not and cannot be guaranteed to ensure all possible permutations are covered.

The information provided through this software is given in good faith but without affecting any warranty or condition which is mandatory implied by legislation applicable hereto. Except as required by such legislation no liability in contract, tort (including negligence) or otherwise shall attach to Ramset Fasteners (Aust) Pty Limited or its servants or agents as a result of the giving of such information or the correctness thereof.

Demo Version

If you want to see what Anchor Design Software could do for you, you may download an unauthorised demo version which enables the look and feel to be tested but which is populated only with fictitious demonstration anchors click below.

To Register For A Fully Functional Version

To obtain a fully functional version of Ramset Anchor Design you must be a suitable qualified structural engineer or equivalent as the software requires this type of expertise to be used effectively and safely. If you believe you fulfil this requirement you may download the limited version of the software immediately to demonstrate the application on the condition that you provide contact details. The appropriate Ramset Representative will contact you to assess your suitability and if satisfied will provide the authorization to unlock the real data. Note the initial download has only has a very limited range of fictitious anchors. You need to provide adequate contact details to get your Authorisation Code.

Fully Functional Version

If you have received an Authorization Key from your Ramset representative you may download a fully functional version now