The Combination Clip is a fully enclosed clip system suitable for securing conduit and tube. The Combination Clip can be opened with a screwdriver if required. This allows for conduit and tube to be removed and replaced without the need for a new clip.
SPECIFICATIONS
Raw Material
Copolymer. UV resistant. Halogen free.
Spacing Recommendation
0.5 & 1 metre (approx) for Pulsa™ gas fix.
Temperature Resistance Properties
Maximum recommended temperature 102°C.
FEATURES & BENEFITS
Less parts, faster installations, lower installed costs. Channel or individual mount. Suitable for use with large cables and conduits. Choice of fixing method: -Pulsa™ gas fix with CableMaster™. -“Slide-on” channel mount. -Drill and anchor. -M6 threaded base for rod/screw attachment.
Male/female connection. side by side mounting. Wide (15mm) strap. Open with screwdriver. Patent pending.
TRADES & APPLICATIONS
INSTALLATION GUIDE
1. Side mount clip into pin guide. 2. Press against work surface. Fire tool. 3. Install the cable or conduit/tube as required. Fasten tie strap.
TECHNICAL DATA & DOCUMENTS
*NOTE: Test concluded when clip pulled over pin head or strap failed. Job-site testing may be required to determine actual achievable job-site values. Results have been achieved with a CableMaster™ tool set at minimum overdrive setting. Accessories failing to fix correctly should be removed and a new fixing set away from any spalled concrete. Tension loads provided are for static load situations only. Values represent a minimum factor of safety of 3:1 based on the test results achieved. Minimum edge distance 75mm, minimum spacing between fixings 50mm. Tension loads are per fixing, however a minimum of 3 fixings per fastening unit should be used.
Register now to receive:
- Access to our extensive Resource Library
- Exclusive specials and promotions
- Notification of new product releases and updates, and
- Other member benefits
