Cordless - self powered, no set up time required
Sequential actuation - safe operation
Depth-of-drive (indicated on top of the tool)
Lock-out feature (security)
Belt hook
Flared fastener guide designed for partitioning track work
5kg actuation force
Soft cushioned grip
Voltage indicator light
Compact carrying case
Well balanced
Heat sensor controls amount of gas injected, relative to the ambient temperature
Electronically controlled fuel injection
Low maintenance. Designed to work in all Australian conditions
In-car charger accessory

Standard Operating Procedure

Always read and understand the instruction manual before attempting to operate a Ramset™ Gas Technology Tool.

1. First insert the fuel cell and battery into the tool.
2. Insert the collated fasteners into the magazine.
3. If the magnetic washer adaptor is fitted, the washer should be placed in the adaptor without compressing the front end of the tool.
4. The tool should then be compressed against the work surface. (Making sure that the tool is perpendicular to the work surface).
5. Once the tool is compressed the trigger can be actuated and the fastener is driven through the material being fastened and into the substrate.