FrameBoss™
|
The Ramset™ FrameBossTM is a fully automatic powder actuated tool, which is capable of fixing 10 pins without the need to reload or cycle the tool. The automatic piston return system and 10 pin magazine allow for faster fixing rates with less effort. The magazine can be adjusted to lock into a number of positions to allow the tool to be used in confined spaces. The FrameBossTM tool is also supplied with a single shot fastener guide to allow the tool to be used with longer fasteners and assembles such as brackets and clips. With a huge 380 Joules of impact energy coupled with power adjustment, the tool can be used in a wide variety of applications e.g. Timber framing, formwork and the fixing of steel track. FrameBossTM is designed to save you time and money. |
SPECIFICATIONS
FRAMEBOSS
Weight |
3.0 kg (3.2 kg with magazine) |
Impact Force |
380J |
Fixing Capacity: |
Timber to Concrete 50mm Timber to Steel 50mm Metal to Concrete 3mm Metal to Steel 3mm |
Pin Capacity (Single Shot)
|
up to 75mm |
Pin Capacity (Magazine)
|
up to 60mm |
Overall Length |
490mm |
Substrates |
Concrete, Steel, Masonary |
FRAMEBOSS75
Weight |
3.7 kg (3.99kg with magazine) |
Impact Force |
380J |
Fixing Capacity: |
Timber to Concrete 50mm Timber to Steel 50mm Metal to Concrete 3mm Metal to Steel 3mm |
Pin Capacity (Single Shot)
|
up to 100mm |
Pin Capacity (Magazine) |
up to 75mm |
Overall Length |
525mm |
Substrates |
Concrete, Steel, Masonary |
|
|
FEATURES & BENEFITS
Automatic piston return No manual cycling required Easy to maintain on site 10 Pin magazine and single shot fastener guide 75mm magazine capacity, 100mm single shot capacity with FRAMEBOSS75 60mm magazine capacity, 75mmsingle shot capacity with FRAMEBOSS 380J maximum impact energy Power adjustment Trigger lock Hand guard Cushioned rubber grip
|
|
INSTALLATION GUIDE
Standard Operating Procedure
Always read and understand the instruction manual before attempting to operate a Ramset™ powder actuated tool. Ramset™ also recommends users obtain personal instruction and training from a Ramset™ representative. 1.First cycle the tool and insert the power load strip. 2.Insert the correct fastener or collated fasteners, (without compressing the front of the tool). 3.The tool should then be compressed against the work surface. (Making sure that the tool is perpendicular to the work surface). 4.Once the tool is compressed the trigger is actuated and the fastener is driven through the material being fastened into the substrate.

|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
|
|