FrameBoss™ Insulation Fasteners for Concrete Masonary and Steel
|
|
FrameBoss™ Insulation Fasteners for Concrete Masonary and Steel |
|
SPECIFICATIONS
| Fastener Body Material |
High Density Polyethylene (HDPE) |
| Holding Diameter |
60 mm (90 mm for C1960) |
| lengths Available |
50 mm to 120 mm |
| Drive Pin Material |
Carbon Steel |
| Drive Pin Plating |
Electroplated Zinc |
| Drive Pin Shear Strength (Ultimate) |
12.0 kN |
|
|
|
TECHNICAL DATA & DOCUMENTS
|

The recommended loads (kN0 are calculated from the mean ultimate load and a factor of safety higher than 4.
A minimum of 4 fixings per fastened unit are required.
*Available upon request
|
|