Versatile – suitable for most applications
Minimal maintenance – easy to dismantle & clean, to reduce downtime
Power – determined by the power load used
Operation – single shot

Standard Operating Procedure

Always read and understand the instruction manual before attempting to operate a Ramset™ powder actuated tool. Ramset™ also recommends users obtain personal instruction and training from a Ramset™ representative.
1.First cycle the tool and insert the correct drive pin, (without compressing the front of the tool).
2.The power load should then be inserted.
3.The tool should then be compressed against the work surface. (Making sure that the tool is perpendicular to the work surface).
4.Once the tool is compressed the trigger is actuated and the fastener is driven through the material being fastened into the substrate.