ConcreBond™
|
|
ConcreBond™ improves toughness and adhesion when added to cement based mixtures such as render, concrete, mortar, grout and tile adhesives.
ConcreBond™ is an acrylic emulsion polymer, which has higher water resistance than conventional concrete bonding agents. |
|
SPECIFICATIONS
|
Typical Properties
| Chemical Type |
Acrylic Resin Dispersion
|
| Service Temperature |
-15°C to + 45°C |
| Application Temperature |
+10°C to + 40°C |
| Colour |
White in wet state. Dries clear. |
| Undiluted |
1 part Concrebond™
0 parts water
10 m2 / litre Coverage |
| Sealing Coat |
1 part Concrebond™
3 parts water
32 m2 / litre Coverage |
| Bond Coat |
1 part Concrebond™
1 parts water
15 m2 / litre Coverage |
| Cement Admixture |
1 part Concrebond™
5 parts water
Coverage not applicable
|
Substrates
|
Concrete, Concrete Block, Brick, Timber, Fibre Cement Sheet, Plasterboard
|
|
|
|
FEATURES & BENEFITS
|
Improves strength and toughness of cement mixtures
Improves adhesion of cement mixtures to existing concrete, brick and
block
Strong bond
Economical
- High concentration
-High dilution
Greater water resistance than conventional bonding agents
User Friendly – clean up with water
User Friendly – low odour
|
|
|
INSTALLATION GUIDE
|
1. Ensure surfaces are clean
2. Primer / Sealer: Prime surface with 1 part Concrebond™ in 3 parts water
3. Bond Coat: Apply bond coat of 1 part Concrebond™ and 1 part water
4. Cement admixture: Add 1 part Concrebond™ in 5 parts water as gauging water in render / solid plaster / mortar / concrete / grout
refer to technical Data Sheet and MSDS available from www.ramset.com.au, for precautions and further detailed installation instructions
|
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
|
|
