Epoxy Putty is a 2-part 100% solvent free epoxy compound for repairing chips, cracks, spalls and other defects in concrete. Its putty like consistency makes it ideal for repairs where a flowable compounds will not stay in place. Epoxy Patch is tough and durable specially formulated for strong bond to concrete, brick and block.
SPECIFICATIONS
Typical Properties
Appearance
Part A: White Thixotropic Paste
Part B: Black Thixotropic Paste
Mixed Colour
Grey
Flammability
Non flammable
Solid content by weight
100%
Tensile strength
30 MPa approx.
Compressive strength
110MPa approx.
Flexural strength
25 MPa approx.
Tensile bond strength
10 MPa approx.
Modulus of elasticity
4.5 x 103 MPa
Service temperature
-10°C to + 65°C
Heat distortion temp
80°C approx.
Hardness
> 80 Shore D
Pot life
30 - 40 mins @ 25°C
Mix ratio
1:1 (part A:B) by volume
Min. Application temp.
10°C
Max. Application temp.
35°C
Density
1.5 kg/Litre
Full cure
7 days at 25°C
Substrate
Concrete, Concrete Block, Brick, Steel
FEATURES & BENEFITS
Sag resistant
High build consistency
Suitable for filling voids with thick cross-section – low heat generated during cure
Trowellable
High compressive strength
100% solids epoxy – solvent free and negligible shrinkage
Water proof when cured
Equal Parts Mix Ratio - Easy to use and measure
TRADES & APPLICATIONS
Maintenance Fitter
Concreter
Concrete Remediation
Repair broken and spalled concrete
INSTALLATION GUIDE
1. Ensure surfaces are clean and dry 2. Measure equal parts of Part A and Part B onto a flat board 3. Using a spatula knead the two parts together until the colour is a uniform grey with no streaks 4. Apply Epoxy Putty using gloved hand or spatula 5. Smooth surface with a trowel
refer to technical Data Sheet and MSDS available from www.ramset.com.au, for precautions and further detailed information
Register now to receive:
- Access to our extensive Resource Library
- Exclusive specials and promotions
- Notification of new product releases and updates, and
- Other member benefits
