DynaSeal™ Sealant
|
|
DynaSeal™ is a flexible acrylic/urethane co-polymer sealant for general joint sealing in building and construction applications. For internal and external conditions. DynaSeal™ Sealant provides a flexible, elastic seal in joints in interior fit-out and concrete, brick and concrete block-work construction. |
|
SPECIFICATIONS
|
Typical Properties
| Appearance |
Non sag smooth thixotropic paste |
| Chemical Type |
Polyurethane / Acrylic co-polymer |
| Service Temperature |
-20°C to + 90°C |
| Specific Gravity |
1.5 |
| Application Temperature |
+5°C to + 35°C |
| Tool Working Time |
15 minutes at 25°C |
| Max. Joint Movement |
± 20% |
| Max. Joint Width |
50mm |
| Elongation ASTM D412 |
290 to 340% |
| Full Cure |
7 days at 25°C |
| Substrates |
Timber, Concrete, Concrete Block, Medium Density Fibreboard (MDF),
Hardboard, Particleboard, Plywood, Brick, Plasterboard, Fibre Cement
Sheet, Ceramic Tiles (unglazed edges), Laminate |
| Flexibility |
Mod. |
Low VOC |
Yes |
| Water Resistance |
Mod. |
Paintable |
Yes |
| Water Immersion |
No |
Water Clean Up |
Yes |
| Heat Resistant |
No |
Exterior Use |
Yes |
| Fire Rated |
No |
UV Resistant |
Yes |
|
|
|
FEATURES & BENEFITS
- Easy Dispensing in Cold Weather
- Paintable with acrylic based surface coatings
|
|
|
INSTALLATION GUIDE
|
1. Ensure surfaces are clean and dry
2. For best results mask around gap to be filled
3. Dispense Dynaseal™ sealant into gap or joint with continuous trigger pressure
4. Tool sealant to create a neat finish
5. Remove masking tape before Dynaseal™ skins
6. Clean up Dynaseal™ with a damp cloth before it dries.
Refer to Technical Data Sheet and MSDS available from www.ramset.com.au, for precautions and further detailed installation instructions
|
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
|
|
