TruBolt™ Stud Anchors
|
|
The TruBolt™ Stud Anchor is a true-to-size, heavy duty, torque controlled expansion anchor, for permanent anchoring into concrete. |
|
SPECIFICATIONS
| Material - Bolt |
Carbon Steel, Stainless Steel 316 (A4) |
| Corrosion Protection |
Zinc Plating, Hot Dipped Galvanising |
| Head Styles |
Hex Nut |
| Fixing Method |
Through Fixture |
| Setting Method |
Torque Controlled |
| Anchoring Method |
Expansion |
| Thread Diameters |
M6, M8, M10, M12, M16, M20 |
| Drilled Hole Diameters |
6mm, 8mm, 10mm, 12mm, 16mm, 20mm |
| Anchor Lengths |
55mm, 65mm, 75mm, 80mm, 85mm, 90mm, 100mm, 120mm, 125mm, 140mm, 150mm, 160mm, 175mm, 180mm, 215mm |
| Maximum Fixture Thickness’ |
6mm, 8mm, 10mm, 12mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 65mm, 70mm, 80mm, 90mm, 100mm |
| Indicative Working Loads in 32MPa Concrete* |
Max Tensile 3.4kN - 32.5kN
Max Shear 2.8kN - 27.3kN |
| Substrates |
Concrete |
* Refer to load table under
"Technical Data & Documents" tab |
|
|
|
|
FEATURES & BENEFITS
- The TruBolt™ diameter equals the required hole diameter providing maximum shear capacity for hole size and making drill bit selection simple. Its cold forged construction ensures superior strength and reliability.
- The anchor design ensures maximum expansion of the sleeve and pull-down on the fixture. These actions are both further assisted by the application of load.
- The anti-rotation expansion sleeve is designed to grip the sides of the hole, preventing anchor rotation during installation.
|
|
|
INSTALLATION GUIDE
- Drill or core a hole to the recommended diameter (same as the TruBolt™) and depth using the fixture as a template. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.
- Insert the anchor through the fixture and drive with a hammer until the washer contacts the fixture.
- Tighten the nut with a torque wrench to the specified assembly torque.
|
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
RANGE Select product to view details
Hex Nut Hot Dipped Galvanised
Hex Nut Stainless Steel Grade AISI 316 (A4)
|
|
