Loxin™ Shield Anchors
|
|
The Loxin™ Shield Anchor is a medium duty, torque controlled, internally threaded, expansion anchor, designed for use in solid substrates such as concrete, brick, block and stone. The Loxin™ requires the installation of a machine bolt or threaded rod to set. |
|
SPECIFICATIONS
Material
|
Carbon Steel |
| Corrosion Protection |
Zinc Plating |
| Head Styles |
-
|
| Fixing Method |
Fixture Aligned |
| Setting Method |
Torque Controlled |
| Anchoring Sizes |
M6, M8, M10, M12, M16 |
| Thread Diameters |
M10, M12, M16, M20 |
| Drilled Hole Diameters |
13mm, 16mm, 22mm, 26mm
|
| Anchor Lengths |
35mm, 52mm, 65mm, 75mm |
| Maximum Fixture Thickness’ |
- |
| Substrates |
Stone, Concrete, Solid Brick, Solid Block |
|
* Refer to load table
|
|
|
|
|
FEATURES & BENEFITS
- The Loxin™ fits flush with the surface of the substrate, leaving no protrusions when not in use.
- The anchor’s internal thread facilitates the use of machine bolts and threaded studs of any length removing restrictions on fixture thickness.
- The Loxin™ requires only shallow embedment, which reduces the risk of striking rebar during hole drilling.
- Four-way expansion provides better grip in weaker substrates.
|
|
|
INSTALLATION GUIDE
|
1.Drill or core a hole to the recommended diameter and depth. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.
2.Insert the Loxin™ into the hole, nut end first, and tap with a hammer until it sits flush with the surface of the substrate.
3.Position the fixture over the Loxin™, insert the correct diameter bolt or stud through the fixture and tighten.
|
|
|
TECHNICAL DATA & DOCUMENTS
PRODUCT INFORMATION
|
TECHNICAL INFORMATION
|
|
|
RANGE Select product to view details
|
|
