The RamToggle™ features a wide wingspan for maximum holding power

Anti-rotation fins prevent spinning in the hole when installing the screw.

The low-profile head allows for flush fixing.

The nylon body is non-conductive.

1. Drill an 8mm hole through the plasterboard.

2. Compress the wings of the RamToggle™ and insert the anchor into the hole.  If necessary, tap with a hammer to ensure a flush fit with the surface.

3. The wings will spread behind the cavity wall.

4. Insert the appropriate gauge screw through the fixture, into the RamToggle™ and tighten, pulling the wings of the anchor firm against the cavity wall.