Ramset™ Self Drilling Plasterboard Screws are manufactured from fine grain high carbon steel and are heat treated for strength.

The bugle head pulls down neatly below the surface of the plasterboard without damaging the board or the face paper.

Ramset™ Self Drilling Plasterboard Screws can be used for either wall or ceiling fixing.

Available loose or collated.

1. Using a drill driver or screw gun, insert the point of a Philips Head screw driver bit into the recess of the screw, place the screw point against the plasterboard surface, lightly piercing the face paper, and drive the screw into the plaster board until the head is flush with the surface.