Premier Group MP is a multi purpose non shrink Class A cementitious grout. It is based on Portland cement, with graded aggregate and chemical additives which impart controlled expansion whilst in the plastic state. The gaseous expansion system compensates for shrinkage and settlement in the plastic state. It comes supplied as a ready to use dry powder requiring only the addition of a controlled amount of clean water to produce a free flowing non shrink grout.

• All general purpose grouting
• Precast and presented panels
• Grouting in column bases, base infilling
• Filling core holes, rod holes and defects in concrete
• Fill in grout for hollow block walls
• Joints between precast panels and other joints
• Tilt slab panels
• Caulking of joints and pipes

FEATURE		BENEFIT
Good dimensional stability		Non Shrink.
Complete void filling		No gaps.
Can be dry packed, rammed, trowelled, poured and pumped		Versatile.
Low in place cost		Economical.
Pre mixed, requires only the addition of water		Ready to use.
Iron Free		Non staining.
Lower water/cement ratio		Reduced drying shrinkage Increased durability
		Reduces Permeability.