|
Ramsetä Anchor Design Software has been produced to complement the typical tools used in a busy structural design office, and is intended for use by qualified design professionals. The program takes input from the designer and advises in a simple, clear output form the anchors suitable for the job.
With a simple 4 step input process, the Ramsetä Anchor Design Software makes it a breeze to specify the correct anchor for a structural connection, allowing you to detail connections quickly, then get back to designing your structure.
|
|
|
|
STEP1: Enter the client and project details for easy reference later. |
STEP2:Describe the conditions that the anchor will experience in service, such as concrete compressive strength, substrate structural thickness and corrosion environment. |
|
|
|
| STEP3: Set out the anchors in the preferred configuration, either using a simple manual GUI interface or select from a number of templates detailing common anchor group configurations. |
STEP4: Apply the load case to the anchor position being evaluated, selecting from either WLL or LSD methods. | |
| |
|
After calculation, the unique, easy to follow output screen advises:
PAnchors suitable for the job given all of the input variables, listing them in order of the percentage of their utilised capacity.
PA cost index, based on the actual installed cost is given so that suitable anchors can be compared on that basis.
Ramsetä Anchor Design Software is a robust, task driven tool that does everything you need it to do, and nothing you don’t.
|
