DHTML Menu, (c)2004 Apycom Ramset
        Search:       

Overview
DynaDrill
Drilling
DD514
DD526
DD527
DD528
DD532
DD543
DD565
DD610
DD665
DD576
CSD4000
Carbide
Diamond Drilling
Diamond Drilling Introduction
CDBR130-Rig
Wet and Dry Vacuum R1600-50C
RW150E
SG125
RG125
RG230E
RM200 Motor
CDBR350 - Rig
RM350 Motor
Laser Levels
Laser RL150
RL5W 5 Way Laser
RLCB
RLM50
18v Lithium-Ion Cordless Range
Technical Information
 

Product Finder

Drills


DD527TM


OVERVIEW

 

The DD527™ is one of 2 new 2Kg corded hammer drills from Ramset. This tool replaces the DD525™ and offers improved power and performance in rotary, hammer and light duty chiselling applications.

 

This robust, innovative and reliable tool offers the high grade performance of the 526 while extending the applications of the tool through the ability to carry out light chiselling works.

 

Greater Power, Speed and Impact Rate make this an even better tool for the electrical, plumbing and general contractor user.

 



FEATURE BENEFITS
Chiselling Function
  • Increased applications and tool versatility
Rotating Brush plate
  • Improved power in forward motion compared to an electrical switch. This also allows for the same power in reverse mode.
New Ventilation Technology 
  • Better motor cooling through improved air circulation
Improved striker design
  • Optimised diameter / length ratio and horizontal alignment within the piston- reduces friction and therefore minimises energy loss
New seling System
  • Minimises grease leakage and provides gret lubrication leading to reduced wearing
Changeable tool holder 
  • This new design makes it easier for service centres to replace the tool holder and extend the life of the tool.
Depth set gauge 
  • operator ease.
Positive Locking Drill Bits
  • Reduced labour costs
Powerful 800w
  • Reduced labour costs
  • Reduced on-site time
Reverse Function – Same Power as Forward
  • Increased versitility of tool
Variable speed  control             
  • Reduced hole damage                                                                                                        
  • Reduced drill times
Soft grip handle
  • Operator comfort
User friendly mode switch –
Rotary / Rotary Hammer
  • Saves time
  • Reduced labour costs.
3 joules impact Force
  • Excellent drilling performance
R3 Plus Tool Holder
  • Reduced down time 
  • Reduced on-site time
  • Reduced reapir costs



SPECIFICATIONS
Power input (watt)
800 watt
Load Speed (1/min)
0-900
Impact Rate (1/min) 
0-4400
Drill Capacity in Concrete (mm)
26 
Impact force (j)
3.0
Changeable tool holder
Yes 
Soft Grip
Yes 
Weight  (kg)                            2.7          
 
                                                                                                           Next Page>