Ramset^TM has been selling Chemical Anchors since 1981, when the Chemset^TM glass capsule range was first introduced to Australia.

Hammer Capsules are easy and fool-proof to install; just put the capsule in the hole and hammer the fixing in. No measuring, no spinning, no waste.

 

Ideal for small jobs with a limited number of fixings.

 

High strength Epoxy Acrylate resin.

 

Select the correct size masonry drill bit of a suitable length to enable the capsule to be fully seated into the hole, if deeper embedment is required, more that one capsule can be placed in the hole.

1. Installing threaded studs. A setting tool for installing threaded rod is a simply a “sleeve” that fits over the head of the threaded stud. The setting tool prevents the threads on the stud bolt becoming damaged during installation and also acts as a depth gauge to ensure that the stud bolt will be set to the correct depth (providing the hole is drilled to the correct depth).
2. Installing rebar. The splashguard is placed over the rebar end closest to the hole flush with the concrete surface to prevent splash back of the capsule components as the rebar is being installed, providing safety for the operator and at the same time protecting the work surface.